牌號 | Carpenter Stainless Type 305 |
廠家 | Carpenter Technology Corporation |
分類 | Steel |
介紹 | Carpenter Stainless Type 305 has been used for severe cold forming operations. The higher nickel content lowers the tendency to work-harden, so that a greater amount of deformation is possible before process annealing is necessary. Having the highest nickel content of the austenitic stainless steels considered to be in the 18-chromium 8-nickel family, Carpenter Stainless Type 305 has the lowest rate of strain hardening of these steels. Carpenter Stainless Type 305 has also been used where the finished part must remain nonmagnetic after severe cold working. Carpenter Stainless Type 305 has been used extensively for parts produced by deep drawing. This steel has worked well in automatic eyelet machines when the part was produced without process annealing. Type 305 should be considered for cold headed bolts, screws, etc. Because of its nonmagnetic properties, Carpenter Stainless Type 305 should also be considered for use in electrical instrumentation. |
Carpenter Technology Corporation 產品展示 | 種類 |
---|---|
EnduraMet? 2304 Stainless | Steel |
Carpenter SCF 260? Alloy | Steel |
Carpenter Ferrium S53 Alloy | Steel |
Carpenter No. 883 Tool Steel | Steel |
EnduraMet? 304LN Stainless | Steel |
Carpenter? CTS? BD4P Alloy | Steel |
Carpenter Stainless Type 440A | Steel |
Carpenter 15-15LC? Modified Stainless | Steel |
Carpenter 19-9 DL | Steel |
Carpenter S7 Alloy Tool Steel | Steel |
訂購說明